Xerox 7245 - Manual (Page 203)

203
Configure Authentication for LDAP
Refer to your LDAP server documentation for all of the information that needs to be entered into the
Machine’s LDAP dialog to set up communications with the LDAP server. At the minimum the Machine will
need a login account and password.
The path to the LDAP dialog is as follows:
At Your Workstation:
1. If not already running, open your Web browser and enter the TCP/IP address of the machine in the
Address or Location field. Press Enter.
2. If not already displayed, click the Properties tab.
3. Select the Remote Authentication Server / Directory Service folder in the list of hot links.
4. Select LDAP Server / Directory Service .
5. Enter the Primary Server IP address (or host name) in the box supplied.
6. Leave the Primary Server Port Number at its LDAP default of 389.
7. Decide whether or not to use encryption (Authentication with SSL) when accessing the LDAP
server.
8. For Authentication Method , choose either Direct Authentication or Authentication of User Attributes.
Direct Authentication sets authentication with the LDAP server with the user name and password
entered by the user.
9. In the Search Login Name box, enter the machine’s login name for accessing the LDAP server.
10. In the Search Password and Re-enter Search Password boxes, enter the machine’s password for
accessing the LDAP server.
11. In the Referral box, use the selection arrow to decide whether or not to return a referral to another
server if the distinguished name being searched is not in the initial directory's tree.
12. In the Referral Hop Limit box, enter the maximum number of referrals to follow in a row.
13. For Server Application, Microsoft Active Directory, Novell NetWare, IBM Lotus Domino, or Other
Applications.
14. Enter other appropriate configuration information into the boxes supplied. Note that the default
setting for Directory Service for Address Book is Use, which allows LDAP to be used with machine
options that can benefit from LDAP address lookups (such as E-mail).
15. Click Apply, and supply the Administrator User name and password if prompted.