Xerox 7245 - Manual (Page 255)

255
TCP/IP Configuration Selection List
As displayed on your screen, the following selections are available for TCP/IP Configuration.
Under the TCP/IP Subject Label
Host Name. The default entry assures a name that is unique to this device on the network.
Get IP Address. Use this drop-down menu to select the method to use to assign IP Addresses.
Select Manual, DHCP, RARP, BOOTP, or DHCP/Autonet.
IP Address entry box. To be filled in manually when Manual addressing is selected.
Subnet Mask entry box. To be filled in manually when Manual addressing is selected.
Gateway entry box. To be filled in manually when Manual addressing is selected.
Under the DNS Subject Label
Get DNS Server Address check box. If enabled with a check mark, the Device will contact the DHCP
Server for the IP Addresses of up to three DNS Servers. If unchecked, this information must be
entered manually.
Three DNS Address boxes are supplied for the manual entry of DNS Server addresses.
DNS Domain Name. A text entry box is supplied for the entry of a DNS Domain Name.
Generate Domain Search List Automatically. A check box is provided for enabling automatic Domain
searches.
Domain Names 1,2,3. Three text boxes are provided for the entry of Domains to search (for example,
Xerox.com).
Connection Timeout. An entry box is provided for entering a Timeout for searches of Domains.
Dynamic DNS Update Box. If your DNS Server does not support dynamic IP address updates there
is no need to enable this checkbox.