Xerox 7245 - Manual (Page 234)

234
Backing Up XSA data and settings and Cloning to another device
The Cloning feature enables you to copy settings, including XSA settings and account information, to a
file on your workstation or Server. You can then use this file to restore the data and settings on the same
machine or to clone other machines. You can only clone XSA settings to another Xerox device that
supports the XSA feature.
Check that the device you want to clone settings to supports XSA
1. At a networked workstation, open your web browser and enter the TCP/IP address of the machine
that you want to clone to. Press Enter.
2. Click the Properties tab.
3. See if Xerox Standard Accounting is shown in the directory tree. If it is not, you cannot clone to this
machine.
4. Click the Xerox Standard Accounting folder in the directory tree.
5. From the display of available hot links, verify that Cloning is among them.
To make a Back-up file
1. At your workstation, open your web browser and enter the TCP/IP address of the machine with the
settings that you want to copy, in the Address bar. Press Enter.
2. Click the Properties tab.
3. Click the Xerox Standard Accounting folder in the directory tree.
4. Select Cloning .
5. From the display of available groups, select the settings that you wish to clone. To clone all features,
select Clone, or to customize the configuration file disable any of the features by clicking the
checkboxes next to the feature(s) and then select Clone.
6. Enter the current administrator User name and password, if prompted. The default is 11111 and x-
admin.
7. Right-click on the .dlm link that appears and select Save Target As.
8. A dialog box will prompt you to specify and name and location for the cloned file. Ensure the
extension reads .dlm.
9. Click Save . The .dlm file can now be used to restore the information to the same machine or to clone
other machines.