Xerox 4112-4127 ST con Xerox EX Print Server powered by Fiery-15059 - Manual

1 2 3
4 5
LEGEND
Print a sample document from a user
computer. Minimum (printer driver only):
Set up a TCP/IP port (Windows XP
user computers). Install the printer
driver from the User Software disc(s)
(DVD support may be required).
Update the printer driver to include
Print Server options.
Full (printer driver and utilities):
Install user software from the User
Software disc(s) on user computers
(DVD support may be required).
User software can also be downloaded
from the Downloads WebTool.
• your Print Server has been unpacked and connected by a service
technician, and is powered on.
• your Print Server has been added to a TCP/IP network that
includes Windows ® XP user computers.
In some cases, initial print device settings may be required; see
Configuration and Setup.
Print a Configuration page from
the Print Server. Perform Setup for the Print Server.
In most cases, the default Setup
configuration is sufficient.
If you change the default Setup
configuration, print another
Configuration page.
Install user documentation on user
computers.
Printing from Windows
Printing from Mac OS
Welcome
Printing from Windows
Printing from Mac OS
Utilities
For supported Setup method(s), see
Configuration and Setup.
Print Server Setup [Title] User Documentation PDF
User Software disc(s)
Install user software on user computers (choose
Minimum or Full user software installation).
See the Configuration
page for the server name
or IP address.
Configuration and Setup Welcome
Configuration and Setup
Welcome
Note:
Use this Roadmap if…
Print Server User Documentation disc
Print Server Setup Roadmap EN
Part Number: 45066601
©2007 Electronics for Imaging, Inc. All rights reserved.