Xerox 7245 - Manual (Page 71)

71
4. Click the Identification Tab and verify that this workstation has a UNIQUE Computer Name (15
characters maximum) and is a member of a workgroup (Workgroup is the default Windows workgroup
name).
5. Click the Configuration Tab and select (highlight) the TCP/IP Protocol. Click the Properties button
and select the NetBIOS Tab. Verify that the checkbox labeled "I want to enable NetBIOS over
TCP/IP" is checked. Next, click the DNS Configuration Tab and make sure that the "Enable DNS"
radio button is selected. Enter in this workstation's Computer Name (from the Identification Tab) into
the "Host" text box. Enter the Domain that this Host (Computer Name) resides in into the "Domain"
text box (xerox.com, for example). In the boxes provided, enter the IP address of the DNS (Domain
Name Service) Server. Finally, click the IP Address Tab and verify that this workstation is using
either a dynamic or static method to obtain a valid TCP/IP Address.
Note: If you are operating a Windows Internet Naming Service Server on an NT only network, you
may wish to configure WINS instead of DNS by selecting the WINS Configuration Tab.