Xerox 8860MFP - Manual

environmental benefits
Solid Ink
Bring green into your
office scheme
with the Xerox
Phaser
® 8860MFP
and Phaser ® 8860 printer
The Xerox solid ink imaging process is
the most environmentally friendly way
to put an image on paper. From its nearly
waste-free printing process to its safe,
toxin-free solid ink sticks, it was made with
the earth in mind.
Leaves no trace behind.
Consider this — solid ink images are printed onto a rotating drum and offset onto paper in just one
pass of the print engine. This Xerox-exclusive imaging process results in nearly 100% ink-to-page
transfer efficiency during normal printing.
In comparison, conventional laser / LED printers’ toner-to-page transfer efficiency is much less,
resulting in residual toner and developer accumulation that requires the device to purge the excess
material to a waste collection container after every print.
The bottom line?
Solid ink printing generates
90% less waste during use than a typical color laser product.
Safe and clean.
Resin-based solid ink sticks are completely safe and clean, and contain no
solvents. Unlike toners, they cannot spill, leak or smudge on your clothes.
Recycle ready.
You’ll be happy to know that you can recycle solid ink printouts
just like the output from laser printers or office copiers.
And because solid ink prints the same vivid color on any paper,
you can use recycled paper for all your printing. You don’t need
expensive, super-white paper to get superb image quality.
Phaser 8860MFP
multifunction system
Phaser 8860