Xerox 7245 - Manual (Page 239)

239
Internet Services
Enable Internet Services (HTTP)
C3
Internet Services are a series of Web (HTML) Pages located within the Device enabling network
communication settings to be conveniently configured from a web browser running on a remotely located
workstation.
Note: If Authentication is enabled, as stated in the Security – Authentication (by Auditron
Administration) topic in the Options section of this guide, you will have to supply the Administrator
User Name and Password when first accessing Internet Services, rather than supplying these
credentials after configuring individual features with Internet Services.
To access Internet Services Settings at the Device
1. Press the Log In / Out button on the Control Panel.
2. Press the "1" key on the numeric keypad five consecutive times. (This is the factory default
"password.")
3. Press the rectangular Confirm button on the touch screen.
4. Press the System Settings button (the right-hand button of the two buttons displayed on the touch
screen). Note: If you press the left button by mistake, the Main menu will be displayed and you will
have to start over at step one above.
5. Press the System Settings button .
6. Press the Network Settings button .
7. Press the Port Settings button to access the Port Settings menu.
8. When the Port Settings menu displays, press the down arrow key to view additional selections.
9. Press the Internet Services (HTTP) selection line.
10. Press the Change Settings button in the lower right corner of the Port Settings menu screen.
11. When the Internet Services (HTTP) menu displays, note that you have two settings available for
selection. The Port Settings menu selections are Port Status and Internet Services Port Number.
After pressing the selection line, to access available settings press the Change Settings button in the
lower right corner of the touch screen.