KORG Electronic Keyboard - Manual (Page 860)

Effect Guide
850
In real acoustic spaces, high frequencies generally
delay somewhat faster than low frequencies, so
moderate amounts of damping will create a more
realistic sound.
Bass Crossover [Hz] [20…24.00k]
Sets the crossover frequency for the Bass Gain.
Gain [dB] [–12.0…+6.0]
This lets you tailor the decay time of the reverb’s low
frequencies, using the frequency set by the Bass Xover.
Negative settings make the low frequencies decay
faster than the main reverb; positive settings make
them decay more slowly.
MODULATION
Rate [0.02…5.00]
The O-Verb includes randomization in the reverberant
wash, to diminish resonant peaks and add a rich
character to the sound. The Rate determines the speed
of the randomization.
Depth [0…100]
This determines the intensity of the randomization.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
101: Reverb Hall
This hall-type reverb simulates the reverberation of
mid-size concert halls or ensemble halls. For detailed
explanations of the parameters, see “104: Reverb Dry
Plate” on page 850.
102: Reverb Smooth Hall
This hall-type reverb simulates the reverberation of
larger halls and stadiums, and creates a smooth
release. For detailed explanations of the parameters,
see “104: Reverb Dry Plate” on page 850.
103: Reverb Wet Plate
This plate reverb simulates warm (dense)
reverberation. For detailed explanations of the
parameters, see “104: Reverb Dry Plate” on page 850.
104: Reverb Dry Plate
This plate reverb simulates dry, light reverberation.
Pre EQ
Trim [0…100]
Sets the EQ input level.
LEQ Fc [Low, Mid-Low]
Selects the cutoff frequency (low or mid-low) of the
low-range equalizer.
LEQ Gain [dB] [–15.0…+15.0]
Sets the gain of the Low EQ.
HEQ Fc [High, Mid-High]
Selects the cutoff frequency (high or mid-high) of the
high-range equalizer.
HEQ Gain [dB] [–15.0…+15.0]
Sets the gain of the High EQ.
REVERB
Reverb Time [sec] [0.1…10.0]
Sets the reverberation time.
High Damp [%] [0…100]
Sets the damping amount in the high range.
Pre Delay [msec] [0…200]
Sets the delay time from the dry sound. p.851.
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay Reverb
Pre Delay Thru