beautypg.com

Delay, L/c/r delay, Input – KORG Electronic Keyboard User Manual

Page 839: Output, L/c/r long delay, L/c/r delay 078: l/c/r long delay, Delay 077: l/c/r delay

background image

Delay 077: L/C/R Delay

829

Delay

077: L/C/R Delay

This multitap delay outputs three Tap signals to the
left, right, and center respectively. You can also adjust
the left and right spread of the delay sound.

INPUT

Input Level Dmod [%]

[+/–100]

Sets the modulation amount of the input level. p.820.

Source

[Off…Tempo]

Selects the modulation source for the input level. p.820.

DELAY

L Delay Time [msec]

[0…2730]

Sets the delay time of the Left Delay.

Level

[0…50]

Sets the output level of the Left Delay.

C Delay Time [msec]

[0…2730]

Sets the delay time of the Center Delay.

Level

[0…50]

Sets the output level of the Center Delay.

R Delay Time [msec]

[0…2730]

Sets the delay time of the Right Delay.

Level

[0…50]

Sets the output level of the Right Delay.

Feedback (C Delay)

[+/–100]

Sets the feedback amount of the Center Delay

Source

[Off…Tempo]

Selects the modulation source of the Center Delay
feedback amount.

Amount

[+/–100]

Sets the modulation amount of the Center Delay
feedback amount.

High Damp [%]

[0…100]

Sets the damping amount in the high range. p.829.

Low Damp [%]

[0…100]

Sets the damping amount in the low range. p.829.

Spread

[0…50]

This parameter sets the stereo width of the effect
sound. The stereo image is widest with a value of 50,
and the effect sound of both channels is output from
the center with a value of 0.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

DELAY: High Damp [%] and Low Damp [%]
These parameters set the damping amount of high
range and low range. The tone of the delayed sound
becomes darker and lighter as it feeds back.

078: L/C/R Long Delay

This multitap delay outputs three Tap signals to left,
right and center respectively. You can set a maximum
of 5,460msec for the delay time.

INPUT

Input Level Dmod [%]

[+/–100]

Sets the modulation amount of the input level. p.820.

Source

[Off…Tempo]

Selects the modulation source for the input level. p.820.

DELAY

L Delay Time [msec]

[0…5460]

Sets the delay time of the Left Delay.

Level

[0…50]

Sets the output level of the Left Delay.

C Delay Time [msec]

[0…5460]

Sets the delay time of the Center Delay.

Level

[0…50]

Sets the output level of the Center Delay.

C Delay

R Delay

Left

Right

Feedback

Spread

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out

Input Level D-mod

High Damp Low Damp

L Delay

Input Level D-mod

+

Level

Level

Level

C Delay

R Delay

Left

Right

Feedback

Spread

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out

Input Level D-mod

High Damp Low Damp

L Delay

Input Level D-mod

+

Level

Level

Level