beautypg.com

Band4 lfo, Output, Reverse delay – KORG Electronic Keyboard User Manual

Page 847: Input, 837 band4 lfo, Delay 087: reverse delay, Input level dmod [%] [+/–100, Source [off…tempo, Reverse time [msec] [0…900, Level [0…100

background image

Delay 087: Reverse Delay

837

BAND4 LFO

Band 4’s LFO has the same parameters as the “BAND1
LFO,” above.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

087: Reverse Delay

This is a delay that plays back the input signal in
reverse. You can also continue feedback while
alternating playing the signal in reverse and forward
directions.

INPUT

Input Level Dmod [%]

[+/–100]

Sets the modulation amount of the input level.

Source

[Off…Tempo]

Selects the modulation source for the input level.

REVERSE DELAY

Reverse Time [msec]

[0…900]

Sets the length of reverse playback (= delay time).
p.837.

Level

[0…100]

Sets the output level of the reverse playback.

L Post-Delay Time [msec]

[0…900]

Sets the delay time of the Left Tap.

Level

[0…100]

Sets the output level of the Left Tap.

R Post-Delay Time [msec]

[0…900]

Sets the delay time of the Right Tap.

Level

[0…100]

Sets the output level of the Right Tap.

Feedback Mode

[Reverse, Reverse/Forward]

Reverse: the feedback plays in reverse.

Reverse/Forward: the feedback alternates between
playing backwards and forwards, as shown below.

Feedback [+/–100]

Sets the feedback amount.

Source

[Off…Tempo]

Selects the modulation source of feedback amount.

Amount

[+/–100]

Sets the feedback amount.

High Damp [%]

[0…100]

Sets the damping amount in the high range.

Sync Source

[Off…Tempo]

Selects the modulation source that will reset the point
at which the sound is captured for reverse playback.
p.837.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

REVERSE DELAY: Reverse Time and Sync Source
The sound will be played in reverse for the duration
specified by Reverse Time. You can reset the dividing
point for reverse playback by specifying a modulation
source for Sync Source.

+

Left

Right

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out

D

-mod

Trigger

Reverse

High Damp

Trim

Level

Feedback

Feedback

Feedback Mode

Delay

Sync

Feedback Mode

Input

wet

wet

Feedback Mode: Revese

Time

Feedback Mode: Revese/Forward

Reverse Time/Sync

Input

wet

Time

Reverse Time

Sync

reset

Reverse Time