beautypg.com

L/c/r bpm long delay, Input, Delay – KORG Electronic Keyboard User Manual

Page 852: Output, Stereo bpm delay, L/c/r bpm long delay 093: stereo bpm delay, Fect 093: stereo bpm delay as follows, Effect guide, Input level dmod [%] [+/–100, Source [off…tempo

background image

Effect Guide

842

092: L/C/R BPM Long Delay

The L/C/R delay enables you to match the delay time
with the song tempo. You can set the delay time up to
5,460msec

INPUT

Input Level Dmod [%]

[+/–100]

Sets the modulation amount of the input level. p.820.

Source

[Off…Tempo]

Selects the modulation source for the input level. p.820.

DELAY

BPM [MIDI,

40.00…240.00]

MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.

Time Over?>

[---, OVER!]

The maximum delay time is 5,460msec. If the
combination of BPM, Base Note, and Times exceeds
this limit, the error message “OVER!” appears in the
display. If this occurs, change the delay time
parameters so that this message no longer appears.

L Delay Base Note

[ … ]

Selects the type of notes to specify the delay time for
the Left Tap. p.822

Times

[x1…x32]

Sets the number of notes to specify the delay time for
the Left Tap. p.822.

Level

[0…50]

Sets the output level of the Left Tap.

C Delay Base Note

[ … ]

Selects the type of notes to specify the delay time for
the Center Tap. p.822.

Times

[x1…x32]

Sets the number of notes to specify the delay time for
the Center Tap. p.822.

Level

[0…50]

Sets the output level of the Center Tap.

R Delay Base Note

[ … ]

Selects the type of notes to specify the delay time for
the Right Tap. p.822.

Times

[x1…x32]

Sets the number of notes to specify the delay time for
the Right Tap. p.822.

Level

[0…50]

Sets the output level of the Right Tap.

Feedback (C Delay)

[+/–100]

Sets the feedback amount of the Center Tap.

Source

[Off…Tempo]

Selects the modulation source for the Center Tap
feedback.

Amount

[+/–100]

Sets the modulation amount of the Center Tap
feedback.

High Damp [%]

[0…100]

Sets the damping amount in the high range.] p.829.

Low Damp [%]

[0…100]

Sets the damping amount in the low range. p.829.

Spread

[0…50]

Sets the width of the stereo image of the effect sound.
p.829.

OUTPUT

This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.

093: Stereo BPM Delay

This stereo delay enables you to set the delay time to
match the song tempo.

C Delay

R Delay

Left

Right

Feedback

Spread

Wet / Dry

Wet / Dry

Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out

Input Level D-mod

High Damp Low Damp

L Delay

Input Level D-mod

+

Level

Level

Level

Tempo

BPM

BPM

Base Note x Times

Base Note x Times

Base Note x Times

Left

Right

Feedback

Wet / Dry

Wet / Dry

Stereo In - Stereo Out

Input Level D-mod

Input Level D-mod

High Damp Low Damp

High Damp Low Damp

Tempo

BPM

BPM

Base Note x Times

Base Note x Times

Adjust [%]

Adjust [%]

Delay

Delay