Here you can adjust the settings for the analog/digital
audio signal input (AUDIO INPUT, S/P DIF), and the
sampling-related settings for Sequencer mode.

In Sequencer mode, the external audio sources you
specify here can be recorded to audio tracks or
sampled. (You can also record or sample a song that’s
played back by the OASYS or your own playing on the
keyboard.) You can also use the OASYS as a 6-in/10-
out effect processor.

You can’t record a Song or pattern while sampling.
Nor can you sample while recording a Song or
pattern.

Using the control surface to adjust Audio Input

You can use the control surface to adjust the Audio
Input Send1 (to MFX1), Send2 (to MFX2),
Play/Rec/Mute, Solo On/Off, Pan, and Level.

For more information, please see “0–9c: Audio Inputs”
on page 22.

The control surface will control the Global mode
settings if “Use Global Setting” is On (checked).

0–8a: Audio Input

Use Global Setting

[Off, On]

On (checked): The Audio Input settings (Input1,
Input2, Input3, Input4, S/P DIF L, S/P DIF R) you
specify in Global mode (P0– Audio page) will be used.

Normally you will leave this On (checked). The Audio
Input settings you make in Global will always be valid;
the Audio Input settings will not change even if you
switch songs.

Off (unchecked): The Audio Input settings (Input1,
Input2, Input3, Input4, S/P DIF L, S/P DIF R) you
specify here will be used.

0–8a

0–7a

0–8c

0–8b

0–8PMC