Avago Technologies LSI53C1030 - Manual (Page 85)

Internal Pull-Ups and Pull-Downs 3-25
Version 2.2 Copyright © 2001, 2002, 2003 by LSI Logic Corporation. All rights reserved.
3.11 Internal Pull-Ups and Pull-Downs
Table 3.23 describes the pull-up and pull-down signals for the
LSI53C1030.
Table 3.23 Pull-Up and Pull-Down Conditions
Signal Name BGA Position Pull Type
MAD[15:0], MADP[1:0] D22, E21, B25, D23, E22, C24,
F22, E23, D26, E25, H22, F24,
G23, D25, F23, G22, C22, B24 Internal Pull-down.
SerialDATA, SerialCLK H26, J25 Internal Pull-down. Pull-up
externally when connected
to a serial EEPROM.
GPIO[7:0] K25, L23, L25, M25, H25, K24,
AE25, AC23 Internal Pull-down.
TST_RST/ AD5 Internal Pull-up.
TCK_CHIP, TDI_CHIP, TMS_CHIP AC6, AF3, AE4 Internal Pull-down.
TRST_ICE/, TCK_ICE, TDI_ICE,
TMS_ICE AB4, AA4, AB3, Y5 Internal Pull-down.
SCANEN, SCANMODE, IDDTN,
CLKMODE_0, CLKMODE_1,
TESTACLK, TESTCLKEN N22, E7, Y4, AA22, AC2, AB6, D7 Internal Pull-down.
DIS_SCSI_FSN/, TESTHCLK, TN AC4, AE2, C5 Internal Pull-up.
DIS_PCI_FSN/ A24 Internal Pull-down. Pull up
externally to enable correct
operation of the PCI FSN.
ZCR_EN/, IOPD_GNT/ N23, AC5 Internal Pull-up.