beautypg.com

Accessing the communication screen – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 35

background image

34

CHAPTER 5 USING CLICK SUPERVISOR

Connecting the computer to another device that has a RS-232 port but is not computer-

programmable, such as the Click 200, will not allow Click Supervisor to communicate with

the other computer-programmable devices on the T-bus.

Accessing the Communication Screen

To connect to your devices with Click Supervisor, open the program by double-clicking on

it. It will bring you to the Click Supervisor main screen (see Figure 5.1).

Figure 5.1 – Click Supervisor Main Screen

Click on Communication to access the Communication screen (see Figure 5.2). There are

two ways to connect to your Click devices: through a serial connection or an IP connection.

Figure 5.2 – Communication Screen

This manual is related to the following products: