Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual
Page 201
200
CHAPTER 23 • CLICK 301
Figure 23.12 – Expert Driver Connect Tab
Setting
Description
Incoming Connec-
tion
Allows you to configure how the device reacts to incoming connections
over the network.
Never rejects all external connection attempts.
Accept DTR accepts external connection requests only when the
Modem Control In input is asserted; this setting cannot be used with
Modem mode.
Accept All is the default setting and accepts any incoming connection
when a connection is not already established.
Response
Lets you set character response. When this is set to Character, a single
character is transmitted to the serial port when there is a change in
connection state:
C = connected
D = disconnected
N = host unreachable
The IP address of the host connecting to the CoBos device will be
provided when you use verbose mode. This option is overridden when
the Active Start Modem Mode or Active Start Host List is in effect. The
default setting is Nothing.
- Click 421 (bluetooth to serial converter) (CLK-421) - User Guide Click 342 (lean managed ethernet switch) (CLK-342) - User Guide Click 341 (lean managed ethernet switch) (CLK-341) - User Guide Click 340 (lean managed ethernet switch) (CLK-340) - User Guide Click 331 (unmanaged ethernet switch) (CLK-331) - User Guide Click 330 (unmanaged ethernet switch) (CLK-330) - User Guide Click 304 (RS-232 to RS-485 converter) (CLK-304) - User Guide Click 305 (RS-232 to RS-485 converter) (CLK-305) - User Guide Click 301 (serial to ethernet converter) (CLK-301) - User Guide Click 100 (16 output contact closure) (CLK-100) - User Guide Click 104 (4-channel DIN rail contact closure) (CLK-104) - User Guide Click 110 (4-channel contact closure eurocard) (CLK-110) - User Guide Click 112 (detector rack card) (CLK-112) - User Guide Click 114 (detector rack card) (CLK-114) - User Guide Click 120 (screw terminal relay) (CLK-120) - User Guide Click 121 (spring cage relay) (CLK-121) - User Guide Click 200 (surge suppression) (CLK-200) - User Guide Click 201 (1 amp AC to DC converter) (CLK-201) - User Guide Click 202 (2 amp AC to DC converter) (CLK-202) - User Guide Click 203 (UPS and battery) (CLK-203) - User Guide Click 204 (4 amp AC to DC converter) (CLK-204) - User Guide Click 210 (AC circuit breaker) (CLK-210) - User Guide Click 211 (AC outlet) (CLK-211) - User Guide Click 221 (DC surge protector) (CLK-221) - User Guide Click 222 (system surge protector) (CLK-222) - User Guide Click 223 (dual-485 surge protector) (CLK-223) - User Guide Click 230 (AC surge protector) (CLK-230) - User Guide Click 250 (wireless surge protector) (CLK-250) - User Guide