beautypg.com

Physical features, Ethernet/fiber optic ports, Leds – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 221

background image

220

CHAPTER 26 CLICK 330/331

Physical Features

Click 330/331 modules have several Ethernet ports, allowing you to create a quick Ethernet

network by simply connecting Ethernet cables.

Figure 25.2 – Diagram of the Click 331

Screw Terminals
The top of the Click 330/331 contains a screw terminal block, with a total of six screw ter-

minal connections. The screw terminal block allows you to wire a power supply (US1 and

GND), a redundant power supply (US2 and GND) and alarm notices (R1 and R2).

Ethernet/Fiber Optic Ports

The Click 330 and 331 feature the following physical Ethernet and fiber options:

˽

Click 330 – Unmanaged switch with eight RJ-45 ports.

˽

Click 331 – Unmanaged switch with six RJ-45 and four ports for connecting fiber optic

cables. These ports can be used to extend the segment length up to 20 km.

LEDs

The Click 330/331 have three different kinds of LEDs.

˽

At the top of each device are two green LEDs labeled US1 and US2, used for monitor-

ing the power supply (see Table 25.1). US1 monitors the main power supply and US2

monitors the second (redundant) power supply.

This manual is related to the following products: