beautypg.com

Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 174

background image

CHAPTER 19 • CLICK 222

173

3 If you are using Click 112 cards, use a short patch cord to share bus 1 between cards

dedicated to the same sensor, as shown with the two rightmost cards in Figure 19.4.

4 If you have more than two sensors in your system, repeat steps 1–3 for all remaining

rack cards.

Figure 19.4 – Wiring the Click 112/114 Rack Cards

5 Connect a patch cord from one of the Click 222 bridge ports to bus 2 of the rack cards.

6 Use short patch cords to daisy-chain bus 2 together on all the cards. This bus will be

used for configuration.

See the Click 112/114 chapter in this manual for more information on configuring and us-

ing the detector rack cards.

This manual is related to the following products: