Front panel menu options – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual
Page 118
CHAPTER 10 • CLICK 112/114
117
The following table illustrates an example of how the mode switch and menu indicator
LEDs are used in configuring the Click 112/114—in this case, how to autobaud bus 2.
Mode Switch Action Display
State
None
Normal operation
Press and hold
Channel map menu option displayed
Continue holding
Autobaud menu option displayed
Release
Autobaud menu option displayed
Press and release
Autobaud menu selected and first
configuration parameter displayed
(bus 1 autobaud)
Press and hold
Second configuration parameter
displayed (bus 2 autobaud)
Release
Second configuration parameter
displayed (bus 2 autobaud)
Press and release
Configuration parameter selected;
autobaud commences (will show
intermediate LED states); auto-
baud finishes and normal operation
resumes
Table 10.6 – Menu Operation Example
Front Panel Menu Options
The following figure documents the menu and configuration options available from the
front panel menu. This label is also printed on the side of the circuit board (on the opposite
side from the DIP switches).
- Click 421 (bluetooth to serial converter) (CLK-421) - User Guide Click 342 (lean managed ethernet switch) (CLK-342) - User Guide Click 341 (lean managed ethernet switch) (CLK-341) - User Guide Click 340 (lean managed ethernet switch) (CLK-340) - User Guide Click 331 (unmanaged ethernet switch) (CLK-331) - User Guide Click 330 (unmanaged ethernet switch) (CLK-330) - User Guide Click 304 (RS-232 to RS-485 converter) (CLK-304) - User Guide Click 305 (RS-232 to RS-485 converter) (CLK-305) - User Guide Click 301 (serial to ethernet converter) (CLK-301) - User Guide Click 100 (16 output contact closure) (CLK-100) - User Guide Click 104 (4-channel DIN rail contact closure) (CLK-104) - User Guide Click 110 (4-channel contact closure eurocard) (CLK-110) - User Guide Click 112 (detector rack card) (CLK-112) - User Guide Click 114 (detector rack card) (CLK-114) - User Guide Click 120 (screw terminal relay) (CLK-120) - User Guide Click 121 (spring cage relay) (CLK-121) - User Guide Click 200 (surge suppression) (CLK-200) - User Guide Click 201 (1 amp AC to DC converter) (CLK-201) - User Guide Click 202 (2 amp AC to DC converter) (CLK-202) - User Guide Click 203 (UPS and battery) (CLK-203) - User Guide Click 204 (4 amp AC to DC converter) (CLK-204) - User Guide Click 210 (AC circuit breaker) (CLK-210) - User Guide Click 211 (AC outlet) (CLK-211) - User Guide Click 221 (DC surge protector) (CLK-221) - User Guide Click 222 (system surge protector) (CLK-222) - User Guide Click 223 (dual-485 surge protector) (CLK-223) - User Guide Click 230 (AC surge protector) (CLK-230) - User Guide Click 250 (wireless surge protector) (CLK-250) - User Guide