beautypg.com

Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 100

background image

CHAPTER 9 • CLICK 110

99

not all combinations of enabled and disabled channels are listed. A complete table is shown

below.

Level 1 LEDs

Channel Enable

Level 2 LEDs

All off (default)

Channel 4 on

Channel 3 on

Channels 3 and 4 on

Channel 2 on

Channels 2 and 4 on

Channels 2 and 3 on

Channels 2, 3, and 4 on

Channel 1 on

Channels 1 and 4 on

Channels 1 and 3 on

Channels 1, 3, and 4 on

Channels 1 and 2 on

Channels 1, 2, and 4 on

Channels 1, 2, and 3 on

Channels 1, 2, 3, and 4 on

LED off
LED on

Cancel and exit menu

Table 9.11 – Front Panel Menu Channel Enable Settings

Note

If you are configuring the device with the front panel menu, it’s vital that you set up
your enabled channels; if you don’t, as you can see in the table, it will default to all
channels being disabled and the device will not work.

See the earlier Navigating through the Menu and the Menu Operation Example sections for

how to configure this parameter.

This manual is related to the following products: