beautypg.com

Physical features, Installation – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 163

background image

162

CHAPTER 16 CLICK 210

Note

The Click 210 is a 0.5 A circuit breaker. There are also 2 A and 8 A models available;
contact your Wavetronix dealer for more information or to order.

Physical Features

Figure 16.2 – Diagram of the Click 210

The Click 210 features two screw terminals, one on each side, for wiring power. It also fea-

tures a reset button on top that can be used to reset the breaker after a current interruption.

Installation

Connect the line (black) wire from the AC terminal block or AC plug into one of the two

screw terminal connectors, and another line wire out of the other connector for power out.

It doesn’t matter which side you use for power in as long as the other end is power out.

Note

Be sure the reset button on top of the module is pressed down before wiring.

This manual is related to the following products: