Physical features, Ups module, Battery module – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual
Page 157
156
CHAPTER 15 • CLICK 203
Note
Because the Click 203 is a power supply, if you are using one, you do not need a Click
201/202/204.
Physical Features
The Click 203 has the following physical features.
Figure 15.2 – Diagram of the Click 203
UPS Module
The UPS module features three pluggable screw terminal blocks. The screw terminal block
on the bottom of the module has two screw terminals for wiring AC power in. The top of
the module has two screw terminal blocks situated next to each other: the block on the right
has two screw terminals for wiring to the battery, and the block on the left has seven screw
terminals, for DC out, among other things. Wiring the device will be discussed later in the
chapter. The screw terminals are removable for easy preinstallation wiring.
The UPS module has three LEDs on the faceplate. See the On-device Configuration section
for information on these LEDs.
The faceplate also features two adjustable features, the potentiometer and the buffer time
selector switch. See the On-device Configuration section for more information.
Battery Module
The battery module has a screw terminal block on top for wiring to the UPS module. There’s
also a fuse on the faceplate of the module to protect the battery in case of a short.
- Click 421 (bluetooth to serial converter) (CLK-421) - User Guide Click 342 (lean managed ethernet switch) (CLK-342) - User Guide Click 341 (lean managed ethernet switch) (CLK-341) - User Guide Click 340 (lean managed ethernet switch) (CLK-340) - User Guide Click 331 (unmanaged ethernet switch) (CLK-331) - User Guide Click 330 (unmanaged ethernet switch) (CLK-330) - User Guide Click 304 (RS-232 to RS-485 converter) (CLK-304) - User Guide Click 305 (RS-232 to RS-485 converter) (CLK-305) - User Guide Click 301 (serial to ethernet converter) (CLK-301) - User Guide Click 100 (16 output contact closure) (CLK-100) - User Guide Click 104 (4-channel DIN rail contact closure) (CLK-104) - User Guide Click 110 (4-channel contact closure eurocard) (CLK-110) - User Guide Click 112 (detector rack card) (CLK-112) - User Guide Click 114 (detector rack card) (CLK-114) - User Guide Click 120 (screw terminal relay) (CLK-120) - User Guide Click 121 (spring cage relay) (CLK-121) - User Guide Click 200 (surge suppression) (CLK-200) - User Guide Click 201 (1 amp AC to DC converter) (CLK-201) - User Guide Click 202 (2 amp AC to DC converter) (CLK-202) - User Guide Click 203 (UPS and battery) (CLK-203) - User Guide Click 204 (4 amp AC to DC converter) (CLK-204) - User Guide Click 210 (AC circuit breaker) (CLK-210) - User Guide Click 211 (AC outlet) (CLK-211) - User Guide Click 221 (DC surge protector) (CLK-221) - User Guide Click 222 (system surge protector) (CLK-222) - User Guide Click 223 (dual-485 surge protector) (CLK-223) - User Guide Click 230 (AC surge protector) (CLK-230) - User Guide Click 250 (wireless surge protector) (CLK-250) - User Guide