beautypg.com

Physical features, Installation – Wavetronix Click 400 (900 MHz radio) (CLK-400) - User Guide User Manual

Page 165

background image

164

CHAPTER 17 CLICK 211

Note

Wiring the Click 211 from the power plant requires the use of two twin terminal blocks.

Physical Features

Figure 17.2 – Diagram of the Click 211

The Click 211 has three screw terminal connections, located on the top of the module, for

wiring in power. There is also an LED located on the front of the module; this LED lights up

when the Click 211 is working properly.

Installation

Installing the Click 211 involves a slight change in how your installation’s power plant is put

together. Follow these steps to wire the power plant and Click 211.

Note

The pictures below show the Click 211 being installed on a backplate as part of a cabi-
net installation. It is not necessary to use a backplate, however, and if you are not,
the wiring will still be the same.

This manual is related to the following products: