Gasboy TopKAT Operation Manual - Manual (Page 99)

MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009 Page 91
Accessing the Terminal Commands Terminal Commands
COnfigure Bulk (CO B)
Use this command to configure your system to accept bulk fueling. The PCU Type must be set
to 4-hose mechanical or 2-hose mechanical to use bulk fueling.
1 Type CO B. The system prompts BULK FUELING? (Y)es or (N)o.
2 Type the appropriate response.
COnfigure LOGger (CO LOG)
Use this command to indicate whether the transaction logger (for direct printout mode) is
enabled or disabled.
1 Type CO LOG. The system prompts ENABLE TRANS LOGGER (Y)es or (N)o: (Y).
2 Press ENTER to accept the default Y.
~ OR ~
Type N and press ENTER.
COnfigure MAnual (CO MA)
Use this command to indicate how the manual entry file is to be set up and handled.
1 Type CO MA.
The system prompts MANUAL ENTRY CHECK REQUIRED - (Y)es or (N)o: (Y)
2 Enter the appropriate response.
• If you select Yes, a record must exist in the manual entry file. The entry made by the user
at the keypad must match a record in the manual entry file.
• If you select No, the user can enter anything at the manual entry prompt and it will be
accepted.
The system displays a menu of manual entry field name choices.
MANUAL ENTRY NAME
1. EMPLOYEE #
2. JOB #
3. ACCOUNT #
4. AUXILIARY #
5. TRIP #
6. DRIVER #
7. MISC #
ENTER (1-7):
3 Select the required manual entry field name by number and press ENTER.