Gasboy TopKAT Operation Manual - Manual (Page 114)

Terminal Commands Accessing the Terminal Commands
Page 106 MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009
PRint DEPTVeh (PR DEPTV) or PRint Acctveh (PR A)
Use this command to display a report by Department or Acct and the Vehicle field on the
screen.
Type PR DEPTV or PR A.
The report appears.
PRint EVents (PR EV)
Use this command to display a listing of system events on the screen. This command displays
the last 100 system events.
Type PR EV.
The system events log appears.
Possible system events are as follows. Events in bold are normal system events; other events
may indicate problems.
PRint KEy (PR KE)
Use this command to print a last key read report. This display also includes a hexadecimal
representation of the contents of the key registers, which is used for diagnostic purposes.
When used with the master/satellite option, this report includes a Master/Satellite menu which
the user can use to print the last key read at the master, a specific satellite or both.
Type PR KE.
The key read report appears.
RESET, TEST BACKUP, TRANSACTIONS
RESET, CPU RESET INSTR RESTORE, TRANSACTIONS
RESET, CPU CLOCK LOSS PUMP DISABLED, #xx (where xx = 01-08)
RESET, UNDEFINED STACK OVERFLOW
RESET, HALT EXIT DIAGNOSTICS
RESET, SOFTWARE WATCHDOG OPERATING MODE CHANGED
RESET, POWER UP PUMP DISABLED, #NN
RESET, EXTERNAL INVALID TRANS POINTER
SIGN ON, COM1 UNINITIALIZED INTERRUPT
SIGN ON, COM2 SPURIOUS INTERRUPT
MANAGER MODE SATELLITE #N ON-LINE
BUS ERROR SATELLITE #N OFF-LINE
SOFTWARE INTERRUPT UNDEFINED
ILLEGAL CPU INSTR MODEM INITIALIZATION, NO RESPONSE
DIVIDE BY ZERO MODEM INITIALIZATION, STRING 1 FAILED
BACKUP, SYSTEM CONFIGURATION MODEM INITIALIZATION, ATRING 2 FAILED
RESTORE, SYSTEM CONFIGURATION MODEM INITIALIZATION, SUCCESSFUL
BACKUP, VEH/MAN FILE MODEM INITIALIZATION, STRINGS OK - NO
RESTORE, VEH/MAN FILE Q1