Gasboy TopKAT Operation Manual - Manual (Page 115)

MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009 Page 107
Accessing the Terminal Commands Terminal Commands
PRint LOCkout (PR LOC)
Use this command to display the lockouts for the vehicle file, your manual entry file, or both
files.
1 Type PR LOC.
The system displays the following menu:
LOCKOUT REPORT
1. VEHICLE
2. MANUAL ENTRY
3. BOTH
ENTER (1-3):
2 Select the required choice.
The lockouts report appears.
PRint MAnual (PR MA)
Use this command to display a listing of the manual entry file.
1 Type PR MA.
The manual entry file listing appears.
2 Select (F)ile or (S)ingle.
If Single was selected, enter manual entry number, when prompted.
The manual entry file listing appears.
Note: If this message appears “Cannot execute, manual entry check not enabled,” the file is
currently disabled. To enable it, use the Configure Manual (CO MA) command and
respond Yes to the Manual Entry Check Required prompt.
Print MODem (P MOD)
Use this command to print (display) the modem strings that are presently loaded.
Type P MOD.
Both strings display on the lines that follow.
PRint PUmp (PR PU)
Use this command to display a listing of your pump’s characteristics.
Type PR PU.
The pump report appears.