Gasboy TopKAT Operation Manual User Manual
Page 86
Diagnostics and Utilities
Accessing the Utilities Menu
Page 78 MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009
INVALID BACKUP
Message occurs during restore when an invalid backup is detected. This message could result
if the card failed internal data checks performed by the system before restore. It could also
result from a card being inserted with an incorrect backup (for example, a system
configuration backup when a vehicle file backup is requested).
INVALID VERSION
Message occurs during restore when an invalid backup version is detected. When a restore is
attempted, the system internally checks the backup version used; if it is incompatible, this
message appears.
NOT A 256K CARD
A backup or restore of all four files has been requested with a 64K or 128K card inserted.
TOO MANY RECORDS
May occur when restoring a V1.0 or V1.1 backed-up transaction file to a V2.0 or greater
system due to the department/account field being increased from one digit to four digits. In
V2.0, a maximum of 1650 transactions can be stored. If there are more than 1650 transactions
between the safe and next pointers (refer to
on
pointer must be moved closer to the next pointer so the distance between them is 1650 or less.
WRITE PROTECTED
Message occurs during backup only if the write protect switch on the PCMCIA card is set to
WP. Remove card, slide WP switch to the right and replace card in slot. Retry procedure.