Gasboy TopKAT Operation Manual - Manual (Page 116)

Terminal Commands Accessing the Terminal Commands
Page 108 MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009
PRint SYstem (PR SY)
Use this command to display a report containing all the system parameters and their current
settings.
Type PR SY.
The system parameters report appears.
PRint TAnks (PR TA)
Use this command to display an inventory report for your tanks.
Type PR TA.
The inventory report appears.
PRint TRansaction (PR TR)
Use this command to display the transaction file.
Type PR TR.
The transaction file listing appears.
A list of transaction error codes appears in
“Appendix D: Transaction Error Codes” on
page D-1 .
PRint Vehicle (PR V)
Use this command to display the vehicle file.
1 Type PR V.
The system responds Select (K)ey or (V)eh/dept.
2 Select (F)ile or (S)ingle.
If Single was selected, enter key number or veh/dept number when prompted.
The system responds Select (K)ey of (V)eh/dept.
3 Type K or V.
The vehicle file displays sequentially according to the field you selected.
REcord ERror (RE ER)
Use this command to indicate whether your system will record error transactions (transactions
without quantity) or simply discard them.
1 Type RE ER.
The system responds RECORD ERROR TRANSACTIONS (Y)ES OR (N)O: (x).
2 Type the required response.