Authorization codes, Check digit, Authorization codes check digit – Gasboy TopKAT Operation Manual User Manual
Page 45
MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009
Page 37
Authorization Codes
Vehicle File Setup - Keypad
Authorization Codes
Authorization code is a one-digit numeric field (0 - 9) used to specify the type of fuels one
may access. You can load one of these code types into the Authorization field of the vehicle
file. The user is permitted to access only the product types represented by that code. Code 0
allows access to all fuels.
Up to 4 product codes (1 - 4) are supported. You decide which product code is associated with
each fuel type (that is, 1=unleaded, 2=super unleaded, 3=diesel, 4=kerosene).
The table below shows the pre-assigned authorization codes available for use.
Check Digit
Check digit is a one-digit numeric field used to determine what data must be entered at the
keypad. The table below shows the available codes.
Code
Required Manual Keypad Entries
0
No entries required
1
Odometer entry required
2
Manual entry required
3
Odometer and manual entry required
4
Vehicle PIN required*
5
Odometer and vehicle PIN required*
6
Manual entry and vehicle PIN required*
7
Odometer, manual entry, and vehicle PIN required*
*See
on
for explanation of vehicle PIN.
Auth Code
Product Codes Allowed
0
All Products
1
Product 1
2
Product 2
3
Product 3
4
Product 4
5
Product 1, 2
6
Product 1, 3
7
Product 2, 3
8
Product 1, 2, 3
9
Product 1, 3, 4