Gasboy TopKAT Operation Manual - Manual (Page 96)

Terminal Commands Accessing the Terminal Commands
Page 88 MDE-4338A TopKAT™ Fuel Management System Operation Manual · February 2009
Accessing the Terminal Commands
The Terminal Commands can be accessed by one of two methods:
• Set the manager’s mode switch (SW1-1) to OPEN. The terminal displays CMD>. Close
the manager mode switch.
• At the terminal SIGN ON prompt, enter the password and press ENTER. The terminal
displays CMD>. Type the short or long form of any terminal commands in this section.
Note: When you sign on in command mode, the system automatically signs off for you after 5
minutes of keyboard inactivity.
The commands are presented alphabetically for ease of reference. In all sequences, press
ENTER after typing unless told otherwise.
Add Inventory (A I)
Use this command to add an inventory amount to a tank either as a delivery or inventory
adjustment.
1 Type A I.
The system prompts ENTER TANK #.
2 Enter the tank number for the inventory addition.
The system prompts ENTER AMOUNT (XXXXX.XXX).
3 Enter the amount of the delivery or adjustment.
The system prompts DELIVERY (Y)es or (N)o:
4 Type Y for delivery or N for adjustment.