Comtech EF Data CDM-IP 300L - Manual (Page 97)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
71
4.2.1.1.3.4 Faults/Alarms – Rx Interface
DISPLAY SELECTIONS/DESCRIPTION
RX INTERFACE
--------------
NOTE:
“-” indicates status of parameter is OK.
“+” indicates a fault.
Reverse contrast “+” indicates an alarm.
RX DATA/AIS
--▓-----------
Data or AIS. When data fault is selected in
the Configuration Interface menu (4.2.1.1.1),
the fault indicates a data stable condition.
This indicates the data coming from the
satellite is all 1s or 0s (i.e., data is not
transitioning). When AIS is selected, the
Alarm indicates the data is all 1s from the
satellite. When None is selected in the
Configuration Interface menu, the RX
DATA/AIS Fault/Alarm is not activated.
Note: AIS is an alarm, not a switching fault.
BUFFER CLK PLL
-----▓--------
Buffer clock phase-locked loop fault. Indicates
the buffer clock PLL is not locked
CONFIGURATION
-------------▓
Configuration alarm