Comtech EF Data CDM-IP 300L - Manual (Page 221)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
195
Menu Options/Fields Entry Description
Dump Packets transmitted
to Ethernet Interface U Toggles [Yes] and [No]
Executing this menu option forces the CDM-IP to dump a
hexadecimal representation of each packet that is
transmitted to the Ethernet Interface.
Dump Packets received
from Ethernet Interface V Toggles [Yes] and [No]
Executing this menu option forces the CDM-IP to dump a
hexadecimal representation of each packet that it
receives from the Ethernet Interface.
Dump Packets received by
Router B Toggle [Yes] and [No]
Executing this menu option forces the CDM-IP to dump a
hexadecimal representation of each packet that is
received by the routing engine. (Note: Does not apply
when in easyConnect
 mode.)
Dump Packets sent to
CDM-IP EndStation G Toggle [Yes] and [No]
Executing this menu option forces the CDM-IP to dump a
hexadecimal representation of each packet that is
received by and destined for this modem. This traffic
would include Pings, SNMP, Telnet, HTTP, and FTP
types of traffic.
Dump Packets received
from CDM-IP EndStation H Toggle [Yes] and [No]
Executing this menu option forces the CDM-IP to dump a
hexadecimal representation of each packet that is
sourced from this modem and destined for some other
device. This allows a user to see what type of packets
this modem is generating internally.
Ping P Enter the ip address in aaa.bbb.ccc.ddd format
Traceroute A Enter the ip address in aaa.bbb.ccc.ddd format
Command Line Debug
Prompt D Enter the password to access the debug command line.
Note: This is reserved for Customer Service and
engineering use.
Save Parameters S This option allows a user to save the current
configuration of the CDM-IP to permanent storage. This
configuration will be restored on each successive power
cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and
return to its parent menu.