0) p – Comtech EF Data CDM-IP 300L User Manual
Page 179

CDM-IP 300L IP-Centric Satellite Modem
Rev. 1
CD/CDMIP300L.IOM
153
6.2.2.1 F
AST
E
THERNET
I
NTERFACE
(
FEI
0) P
AGE
The Fast Ethernet Interface page is activated from the Interface Configuration page.
The Fast Ethernet Interface page contains the following options/fields:
Menu Options/Fields
Entry Description
MAC Address
Read
Only
The MAC Address defines the hardware destination MAC
Address that is used when an Ethernet packet is destined
for the CDM-IP Ethernet Interface. This address is unique
and has been assigned permanently at the factory.
Speed/Mode
E
The Ethernet Speed Mode is a configurable parameter of
the CDM-IP and thus its exact setting can vary between
specific installations. The default setting allows the
Ethernet port to auto negotiate its link speed on power-up.
Selections are:
1 -- Auto
2 -- 10 MB/sec Half Duplex
3 -- 100 MB/sec Half Duplex
4 -- 10 MB/sec Full Duplex
5 -- 100 MB/sec Full Duplex
IP Address
I
This is the IP Address assigned the CDM-IP Ethernet
Interface.
Enter the IP address in aaa.bbb.ccc.ddd format
Subnet Prefix Length
M
Specifies the Subnet Mask assigned to the Ethernet
Interface of the CDM-IP.
Enter the subnet mask prefix length (8...30)
Save Parameters
S
This option allows a user to save the current configuration
of the CDM-IP to permanent storage. This configuration
will be restored on each successive power cycle of the
CDM-IP.
Exit
X
This option allows a user to exit the current menu and
return to its parent menu.