Comtech EF Data CDM-IP 300L - Manual (Page 219)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
193
6.2.8.3 A
DMINISTRATIVE
D
ATABASE
O
PERATIONS
P
AGE
The Administrative Database Operations Page is activated from the Operations and
Maintenance Page.
The Database Operations option allows the user to view, save, or erase an existing user
configuration of the CDM-IP. A CDM-IP uses these types of configuration files to
initialize itself on power-up.
The User Configuration File allows a User to over-write the values defined in the Factory
Configuration file. This allows full customization of a CDM-IP without erasing a set of
parameters defined from the factory. The User configuration file can also be retrieved or
overwritten via FTP by specifying the filename ‘param1’.
The Administrative Database Operations Page contains the following options/fields:
Menu Options/Fields Entry Description
Save Parameters to
permanent storage P This option allows a user to save the current
configuration of the CDM-IP to permanent storage.
This configuration will be restored on each successive
power cycle of the CDM-IP.
Restore Factory Default R Restores the CDM-IP settings to “safe” values as
defined by the factory.
Load Parameters from
permanent storage F This option overwrites the current configuration of the
CDM-IP with the configuration last saved to permanent
storage. It allows the user to perform an “Undo” type
operation if the CDM-IP is put into an undesirable state
by the user.
Save Parameters S This option allows a user to save the current
configuration of the CDM-IP to permanent storage.
This configuration will be restored on each successive
power cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and
return to its parent menu.