Comtech EF Data CDM-IP 300L - Manual (Page 197)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
171
Menu Options/Fields Entry Description
Add IP to MAC ARP entry M Adds an IP to MAC ARP entry.
Delete ARP Entry D Allows the user to delete a Static ARP entry. Queries
the user for the IP address of the ARP entry to delete.
Display ARP Tbl A Displays the entire IP to MAC ARP table. Includes the
Static as well as dynamic ARP entries. Displays blocks
of 10 ARP entries. Hit ‘Enter’ key to display next 10
entries or ‘Escape’ to return to ARP Table Utilities
page.
Flush ARP Table F This option allows the entire ARP table to be removed.
This is equivalent to performing the standard UNIX
command “arp –d” on each address reported in an “arp
–a” command. The command only flushes the dynamic
ARP entries. The static ARP entries will not be
removed.
Base B The ARP Table menu allows the user to view up to 8
different ARP definitions per screen. To allow editing
on any of the 256 entries that can be defined, the user
can select a base address to control which 8 ARP
entries are displayed. For example, if the user wants to
edit static ARP Entries 32-40, then a Base value of 32
should be defined.
Save Parameters S This option allows a user to save the current
configuration of the CDM-IP to permanent storage.
This configuration will be restored on each successive
power cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and
return to its parent menu.