Comtech EF Data CDM-IP 300L - Manual (Page 264)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
238
OID Description
cdmipRedundantTrafficSubnetMaskLen This is the length of the traffic IP address
and can float between the two redundant
modems if a failure occurs.
cdmipForceUnitOffline Forces a redundant switchover so that if
the modem is online it will transition to
offline and stop processing traffic. If the
modem is already offline, then this
command will be ignored.
8.5.2.6 O
PERATION AND
M
AINTENANCE
G
ROUP
Table 46. Operation and Maintenance Subgroup OIDs
OID Description
cdmipAppVersion Displays the CDM-IP Software’s name, version, and
date.
cdmipSaveConfiguration Allows a user to save the current configuration of the
CDM-IP300L to permanent storage.
cdmipReset Allows a user to reboot the modem. It has the same
logical effect of power-cycling the unit.
cdmipRestoreFactoryDefaults Restore factory defaults configuration.
cdmipLoadParamsFromStorage Load the system configuration from the param file
stored on the flash.
cdmipBootImage Determines which version of the CDM-IP software
package (includes Application, FPGA, and FFPGA)
will be loaded upon boot-up. The possible options
are:
Latest – boot the newest software package based
upon date.
Image 1 – boot the software package loaded into the
first slot in permanent storage.
Image2 – boot the software package loaded into the
second slot in permanent storage.
cdmipUpgradeSlot Determines which installed software package
(includes Application, FPGA, and FFPGA) that the
CDM-IP will overwrite when upgrading with a new
software package. The possible options are:
Oldest – overwrite the oldest software package
based upon date.
Image1 – overwrite the software package loaded into
the first slot in permanent storage.
Image 2 – overwrite the software package loaded
into the second slot in permanent storage.