Comtech EF Data CDM-IP 300L - Manual (Page 141)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
115
Bulk Consol.
Status
Command:
Response:
>add/BCS_p1,p2,p3, . . . pn'cr''lf']
This command causes bulk modem status to be returned. To
reduce the length of the response, message parameter data are
returned without identifiers. However, parameter identification can
be determined by order of return. Each status parameter is
terminated with a ',' (comma) except for the last parameter which
has the standard message termination sequence ('cr''lf']). Most of
the data returned is formatted the same way as the single
command status request (refer to the appropriate portions of this
document in preceding sections). Additional configuration status
of new options and features will always be appended to the end.
Where 'pn' is the last parameter returned.
Parameter
Number Parameter Name
(Command Reference)
Description