Comtech EF Data CDM-IP 300L - Manual (Page 164)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
138
Menu Options/Fields Entry Description
3xDES Configuration D The 3xDES Configuration Page allows the user to
determine if 3xDES encryption is enabled on a device
and if so, the 3xDES keys that are used to decrypt
traffic. The keys specified for the transmit function of
the CDM-IP are completely independent for the 3xDES
keys specified for the receiver function.
SMTP Configuration M The SMTP configuration page allows the user to
specify appropriate settings for SMTP email server.
SNMP Configuration N The SNMP configuration page allows the user to
specify management parameters for SNMP.
CDM-IP Working Mode C Used to set the CDM-IP Working Mode –
easyConnect
 or Router. See Section 1.3.6 for
additional information.
CDM-IP WAN TX Framing
Mode Read
Only
Comtech Native – CEFD Proprietary Framing
CDM-IP WAN RX Framing
Mode Read
Only
Comtech Native – CEFD Proprietary Framing
easyConnect  Multicast
Option
E When unit is running in easyConnect  mode, multicast
is only forwarded across link if both units have this
feature enabled.
Header comp refresh rate
(in pkts) for UDP/RTP1 R This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Header comp refresh rate
(in pkts) for UDP U This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Header comp refresh rate
(in pkts) for all others O This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Payload comp refresh rate
(in pkts) Q This setting allows for the adjustment of how often to
send a full payload when Payload Compression is
enabled.
Save Parameters S This option allows a user to save the current
configuration of the CDM-IP to permanent storage.
This configuration will be restored on each successive
power cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and
return to its parent menu.