Table 38. encryption subgroup oids – Comtech EF Data CDM-IP 300L User Manual
Page 255

CDM-IP 300L IP-Centric Satellite Modem
Rev. 1
CD/CDMIP300L.IOM
229
8.5.1.5 E
NCRYPTION
S
UBGROUP
Note: This subgroup will only be accessible in the MIB tree if the Encryption FAST feature has
been purchased and the license key has been entered through the modem’s front panel.
Otherwise, both GETS and SETS on these OIDs will return errors.
This subgroup controls the parameters for the Triple DES (3xDES) feature. Each
Transmit/Receive key is of 192-bit length.
Table 38. Encryption Subgroup OIDs
OID Description
cdmipTransmitEncryptEnabled Enables/disables encryption on the transmit side.
cdmipReceiveDecryptEnabled
Enables/disables decryption on the receive side.
cdmipTransmitKey1
Allows the user to specify the value of Key1 used to
encrypt packets transmitted to the satellite.
cdmipTransmitKey2
Allows the user to specify the value of Key2 used to
encrypt transmitted packets transmitted to the satellite.
cdmipTransmitKey3
Allows the user to specify the value of Key3 used to
encrypt packets transmitted to the satellite.
cdmipTransmitKey4
Allows the user to specify the value of Key4 used to
encrypt transmitted packets transmitted to the satellite.
cdmipTransmitKey5
Allows the user to specify the value of Key5 used to
encrypt packets transmitted to the satellite.
cdmipTransmitKey6
Allows the user to specify the value of Key6 used to
encrypt transmitted packets transmitted to the satellite.
cdmipTransmitKey7
Allows the user to specify the value of Key7 used to
encrypt packets transmitted to the satellite.
cdmipTransmitKey8
Allows the user to specify the value of Key8 used to
encrypt transmitted packets transmitted to the satellite.
cdmipReceiveKey1
Allows the user to specify the value of Key1 used to
decrypt traffic being received from the Satellite
Interface.
cdmipReceiveKey2
Allows the user to specify the value of Key2 used to
decrypt traffic being received from the Satellite
Interface.
cdmipReceiveKey3
Allows the user to specify the value of Key3 used to
decrypt traffic being received from the Satellite
Interface.
cdmipReceiveKey4
Allows the user to specify the value of Key4 used to
decrypt traffic being received from the Satellite
Interface.
cdmipReceiveKey5
Allows the user to specify the value of Key5 used to
decrypt traffic being received from the Satellite
Interface.