Comtech EF Data CDM-IP 300L - Manual (Page 74)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
48
3.1.2 S
ERIAL
R
EMOTE
C
ONTROL
O
PERATIONS
The CDM-IP modem provides a standard serial (RS-232, RS-485 4-wire, or RS-485 2-
wire) interface that can be used only for monitor and control of CDM-IP 300L modem
parameters (Monitor and Control of the CDM-IP 300L IP parameters is provided
separately via the Console Port interface). Access to this application is provided via the
‘Remote Control B’ (DB9) port on the back of the modem. Refer to Chapter 5 for
detailed operations using this interface.
3.1.3 S
ERIAL
C
OMMAND
L
INE
I
NTERFACE
(CLI) O
PERATIONS
The CDM-IP modem provides a serial (RS-232) command line interface that can be used
only for monitor and control of CDM-IP 300L IP parameters (Monitor and Control of the
CDM-IP 300L modem parameters is provided separately via the ‘Remote Control B’
port). Access to this application is provided via the ‘Console Port’ (RJ-11) port on the
back of the modem. Refer to Chapter 9 for detailed operations using this interface.
3.1.4 T
ELNET
O
PERATIONS
The CDM-IP modem provides a Telnet interface with an embedded, easy to use, multi-
level, menu system that can be used to monitor and control all CDM-IP modem and IP
parameters. Access to this application is provided via the 10/100 BaseT IP interface (RJ-
45). Refer to Chapter 9 for detailed operations using this interface.
3.1.5 W
EB
S
ERVER
O
PERATION
The CDM-IP modem provides an embedded web server application that serves standard
HTML web pages that can be used to monitor and control all CDM-IP modem and IP
parameters. These web pages have been designed for optimal performance when using
Microsoft’s Internet Explorer version 5 or higher. Access to this application is provided
via the 10/100 BaseT IP interface (RJ-45). Refer to Chapter 10 for detailed operations
using this interface.
3.1.6 SNMP O
PERATIONS
The CDM-IP modem supports Simple Network Management Protocol (SNMP) interface
that can be used to monitor and control all CDM-IP modem and IP parameters. Access
to this application is provided via the 10/100 BaseT IP interface (RJ-45). Refer to
Chapter 11 for detailed operations using this interface.