4 end, Character – Comtech EF Data CDM-IP 300L User Manual
Page 124

CDM-IP 300L IP-Centric Satellite Modem
Rev. 1
CD/CDMIP300L.IOM
98
>add/?ER4_modem in local mode'cr''lf']
(Modem in local error; send the REM command to go to remote mode.)
>add/?ER5_hard coded parameter'cr''lf']
(Error message indicating that the parameter is hardware dependent and may not be changed remotely.)
Note: “add” is used to indicate a valid 1 to 3 character device address in the range between 1
and 255.
Example:
Command: <3/REM_
Response: >3/REM_
5.3.4 E
ND
C
HARACTER
Each message is ended with a single character, which signals the end of the message:
“cr”
Carriage return character for commands
“]”
End bracket for responses
This manual is related to the following products: