Comtech EF Data CDM-IP 300L - Manual (Page 335)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
309
12.1.5 M
AIN
M
ENU
Figure 27. Main Menu
To use the Command Line Interface (CLI), select the appropriate sub-menu or the entry
by pressing the character indicated at the right. Enter x to return to the previous menu.
Note: Any CDM-IP configuration changes need to be saved to permanent storage by selecting [S]
from any menu screen and then typing [y] to save.
12.1.6 R
ESTORING
F
ACTORY
D
EFAULT
C
ONFIGURATION
The following sections in this guide assume that the CDM-IP is still in factory default
configuration for IP. If that is not the case, the factory default configuration can be
restored from the menu:
Step Description
1 From the Main Menu, select Operations and Maintenance sub-menu [O].
2 From the Operations and Maintenance menu, select Database Operations sub-menu
[D].
3 From the Database Operations menu, select Restore Factory Default option [R].
4 Confirm when prompted by typing ‘yes’ when the following prompt is displayed;
Are you sure you want to restore factory default settings?
WARNING: Choosing Yes will restore factory defaults and then
reboot.
This will erase any user configuration and restore the CDM-IP to factory default
configuration. Proceed to Section 12.2 to perform the easyConnect
 Mode configuration
or to Section 12.3 to perform the Router Mode configuration.