2 interface, Group, Table 41. ethernet interface subgroup oids – Comtech EF Data CDM-IP 300L User Manual
Page 259

CDM-IP 300L IP-Centric Satellite Modem
Rev. 1
CD/CDMIP300L.IOM
233
8.5.2 I
NTERFACE
G
ROUP
This Group controls the parameters of the modem’s Ethernet and HDLC interfaces.
8.5.2.1 E
THERNET
I
NTERFACE
S
UBGROUP
The subgroup defines the modem’s Ethernet interface. These include parameters for
setting the Ethernet speed, IP address, and IP address subnet prefix length.
Table 41. Ethernet Interface Subgroup OIDs
OID Description
cdmipEthernetMacAddress
Defines the hardware MAC Address. This address is
assigned permanently at the factory.
cdmipEthernetSpeed
Defines the Ethernet interface’s mode and speed. It
defaults to auto negotiate. The “cdmipEthernetSpeed”
OID can be set using the following options:
1 Auto
2
10 MB/sec Half Duplex
3
100 MB/sec Half Duplex
4
10 MB/sec Full Duplex
5
100 MB/sec Full Duplex
cdmipEthernetIpAddress
IP address assigned to the Ethernet Interface.
cdmipEthernetSubnetPrefixLen Specifies the subnet mask assigned to the Ethernet
Interface. Valid subnet mask prefix length are between
8 and 30.