2 cdm-ip m – Comtech EF Data CDM-IP 300L User Manual
Page 347
CDM-IP 300L IP-Centric Satellite Modem
Rev. 1
CD/CDMIP300L.IOM
322
13.2.2 CDM-IP M
ODULE
F
IRMWARE
Perform the CDM-IP Module upgrade by using an FTP (File Transfer Protocol) utility program.
The latest firmware releases are available on the Comtech EF Data web site
(
is required to perform a Comtech EF Data
firmware reflash. If web downloading is not available or practical, contact the Network
Customer Support department (
an alternate method.
The downloadable firmware files are provided in .zip or self extracting .exe formats. If your
firewall does not permit downloading an .exe file, download the .zip file. The downloadable file
contents are identical, usually comprised of several flashable data files.
How to Download CDM-IP Module Firmware
Step Procedure
1
Create a new folder on the PC. This folder will be the destination folder for any flash upgrade files
downloaded.
2
On the Comtech EF Data web
"downloads" link.
3 Click
the
"flash upgrades" link for detailed downloading instructions. There are two primary
instruction sheets: One for the base M&C/BULK firmware and one for the CDM-IP300L and CDM-
IP 300L IP module firmware. The instruction sheet displayed will be for the M&C/BULK firmware.
Click on the link for the CDM-IP module to display the CDM-IP firmware upgrade procedure.
4 Click
the
"flash firmware data files" link (located at the bottom of the instruction page). The flash
firmware data files are organized by product.
5
Click the product type (CDM-IP300L or CDM-IP 300L).
6
Identify and download the latest IP Module firmware file to the destination folder on the PC.
How to Perform a Flash Upgrade for the CDM-IP Module
Step
Procedure
1
On the PC, double-click the .exe or .zip flash upgrade file to uncompress its contents. Ensure that the
following unzipped files are located in the directory:
fw9872-X-.mpp, where "x" is the version number (Boot).
fw101741-1-.mpp, where "x" is the version number (Application).
fw9784-X
.
mpp, where "x" is the version number (FPGA).
fw9783-X
.
mpp, where "x" is the version number (FFPGA).
fw101741-X-.mib, where "x" is the version number (cdmipController mib).
fw101741-X-.mib, where "x" is the version number (cdmip300L.mib).
fw101741-X-.mib, where "x" is the version number (cdmip300L.mib).
fw101741-X-.mib, where "x" is the version number (cdmip300LTraps.mib).
fw101741-X-.mib, where "x" is the version number (cdmip300Ltraps.mib).
Notes on .mib files: The .mib files are only needed when using SNMP operation with a customer-
supplied MIB browser. The .mib files are compiled on a MIB Browser (cdmipController MIB must be
compiled first; see compiling instructions provided with the MIB Browser that you are using).
The cdmipController.mib (fw101741-X-.mib) file is required for proper SNMP operation of both the CDM-
IP300L and CDM-IP 300L.
The cdmip300L.mib (fw101741-X-.mib) file is required if you are using CDM-IP300L modems.
The cdmip300L.mib (fw101741-X-.mib) file is required if you are using CDM-IP 300L modems.
The cdmip300LTraps.mib (fw101741-X-.mib) is required if you are only using the CDM-IP300L and using
SNMP v1 traps.