Start a widescreen project – Adobe Premiere Pro CS3 User Manual
Page 42
ADOBE PREMIERE PRO CS3
User Guide
36
4
(Optional) Select the Custom Settings tab, and customize the preset as needed.
5
(Optional) For DVCPRO50 P2 or DVCPROHD P2 projects, to set the number of monaural channels that you
can output to P2, select Default Sequence. Then in the Master drop-down menu in the Audio pane, select one of the
following:
Mono
Outputs a single mono channel.
Stereo
Outputs two mono channels with stereo panning intact.
5.1
Outputs four mono channels respecting the Left-Front, Right-Front, Left-Rear, and Right-Rear panning.
6
Enter a location and name for the project file and click OK.
Note: On Windows, you can create a custom project preset for previewing uncompressed 10-bit or uncompressed 8-bit
footage. For more information, see Create A Project With Uncompressed Video Playback (Windows Only) in “
23 in Adobe Premiere Pro Help.
See also
About high-definition (HD) video
Adjust project settings and presets
Options for exporting HD and HDV sequences
Importing assets from file-based sources
Start a widescreen project
You can edit widescreen footage shot in DV, HDV, or HD formats. To display and play back widescreen assets
correctly, you must set your project settings to accomodate widescreen assets. When you are done editing your
movie, use Adobe Media Encoder to output 3GP files with the correct audio and video characteristics for the target
device.
1
Do one of the following:
•
From the Welcome screen, click New Project.
•
Select File > New >Project.
2
In the New Project dialog box, select the Load Preset tab.
3
Select a preset that matches your footage. Do one of the following:
•
For DV footage, select one of the DV-NTSC or DV-PAL presets with Widescreen in its name. These use
horizontal pixels (with pixel aspect ratios of 1.2 for NTSC and 1.422 for PAL).
•
For an HDV project, select an HDV preset using HD Anamorphic 1080 (pixel aspect ratio 1.333) or Square pixels
(pixel aspect ratio 1.0).
•
For an HD project, select one of the presets provided with your HD capture card.
4
Enter a location and name for the project file and click OK.
See also
Adjust project settings and presets
April 1, 2008