Set the location for captured audio, Record a voice-over – Adobe Premiere Pro CS3 User Manual
Page 201
ADOBE PREMIERE PRO CS3
User Guide
195
Set the location for captured audio
1
Choose Edit > Preferences
> Scratch Disks (Windows) or Premiere Pro > Preferences > Scratch Disks (Mac OS).
2
For Captured Audio, select a location and click
OK.
Record a voice-over
1
Connect the microphone to the mic-level input jack on the computer or sound card. If necessary, choose Edit >
Preferences
> Audio Hardware (Windows) or Premiere Pro
>
Preferences
> Audio Hardware (Mac OS) to
configure the input device.
2
If you want to preview the Timeline panel as you record, position the current-time indicator in the Timeline
panel a few seconds before the time when you want the voice-over to begin.
3
In the Audio Mixer, click the Record Enable button
for any tracks on which you want to record audio.
Audio Mixer recording controls
A. Record Enable button for track B. Record button for Audio Mixer
4
In the Audio Mixer, click the Record button for the sequence. Adobe Premiere Pro prepares the sequence for
recording but moves the playhead only when you press the Play button.
5
Select Meter Input(s) Only in the Audio Mixer menu to meter only the sound card’s inputs.
6
Test the input levels by speaking into the microphone.
7
When you finish testing, deselect Meter Input(s) Only to meter the project’s audio tracks also.
8
Speak into the microphone again. Watch the Audio Mixer level meters to ensure that the input levels for
record-enabled tracks are high but not clipping.
9
Click the Play button in the Audio Mixer, and then start speaking the voice-over.
See also
A
B
April 1, 2008