Rockwell Automation 7000L PowerFlex 7000 Medium Voltage AC Drive C Frame - Marine - Manual (Page 296)

4-120 Component Definition and Maintenance
7000L-UM302B-EN-P – June 2013 7000 ―C‖ Frame - Marine
PF7000 in Download Mode
To place the drive in download mode, you should be in the UTILITY
– TRANSFER screen. You will not be able to do this if the drive is
running. Ensure the drive is stopped, and the E-Stop is pressed.
This is just a precaution, as all versions of firmware 7.xxx and later
will not allow you to attempt a download while running.
This time press F9 for SYSTEM, and a screen will appear telling you
that you are in download mode.
There are two status LEDs (D9 and D11) on the DPM, which
provides indication of the programming process. The following
illustrates the states of the LED:
Solid Green – when both LEDs are solid green, the Application
firmware is running.
Flashing Green – when either D9 or both LEDs are flashing, the
board is in download mode. (If the DPM bootcode

1.006, then
only D9 will be flashing and D11 will stay solid. If the bootcode

1.005, then both LEDs will be flashing.)
After putting the drive in download mode, the following is the
display on the drive terminal:
SYSTEM IS IN DOWNLOAD MODE
Connect your PC to DPM data port
And download new firmware.
Press any Key to Continue …
Preparation for
Downloading Firmware
(cont.)