Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules - Manual (Page 386)

386 Publication 1756-UM009C-EN-P - December 2010
Appendix F 1492 AIFMs for Analog I/O Modules
IF16 Differential
voltage 492-AIFM8-3
1492-RAIFM8-3
(3) Feed-through 8- or 16-channel
input or output
with 3
terminals/channel 1492-ACABLExUC
1492-AIFM8-F-5 N/A Fusible 8-channel input
with 24V DC blown
fuse indicators, 5
terminals/channel
1492-AIFM16-F-3 16-channel input
with 24V DC blown
fuse indicators, 3
terminals/channel
1492-AIFM16-F-5 16-channel input
with 24V DC blown
fuse indicators, 5
terminals/channel
1756-IR6I 1492-AIFM6S-3
1492-RAIFM6S-3
(2) Feed-through 6-channel isolated
with 3…4
terminals/channel 1492-ACABLExZ
1756-IT6I 1492-AIFM6TC-3 N/A Thermocouple 6-channel with 3
terminals/channel 1492-ACABLExY
1756-IT6I2 1492-ACABLExYT
1756-OF4 Current 1492-AIFM4-3
1492-RAIFM4-3 (4) Feed-through 4-channel input,
output or 2-in/2-out
combination with 3
terminals/channel 1492-ACABLExVB
Voltage 1492-ACABLExVA
1756-OF6CI 1492-AIFM6S-3
1492-RAIFM6S-3
(2) 6-channel isolated
with 3…4
terminals/channel 1492-ACABLExY
1756-OF6VI
1756-OF8 Current 1492-AIFM8-3
1492-RAIFM8-3
(3) 8- or 16-channel
input or output
with 3
terminals/channel 1492-ACABLExWB
Voltage 1492-ACABLExWA
(1)
Some analog I/O modules can be operated in up to four modes (current/voltage, single-ended/differential) based on connections. In all cases, each channel is
factory-configured for the same mode. However, you can field configure any channel for another mode. You nay need to alter the terminal block wiring to match the
application. Refer to the controller installation manual.
(2) C o mpatible RTB plug; 1492-RTB12N (screw-style terminals) or 1492-RTB12P (push-in style terminals). Order plugs separately.
(3) Compatible RTB plug; 1492-RTB16N (screw-style terminals) or 1492-RTB16P (push-in style terminals). Order plugs separately
(4) Compatible RTB plug; 1492-RTB8N (screw-style terminals) or 1492-RTB8P (push0in style terminals). Order plugs separately.
(5) Cables are available in lengths of 0.5 m, 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the catalog number in place of the x: 005=0.5 m,
010=1.0 m, 025=2.5 m, 050=5 m. Example: 1492-ACABLE025TB is for a 2.5 m cable, and the letters TB.
I/O Cat. No.
(1) Mode AIFM Cat. No.
(Fixed Terminal
Block) AIFM Cat. No.
(RTB Socket
Assembly) AIFM Type Description
Pre-wired Cable
(5)
(x=cable length)