Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules - Manual (Page 202)

202 Publication 1756-UM009C-EN-P - December 2010
Chapter 10 Configure ControlLogix Analog I/O Modules
Create a New Module After starting the RSLogix 5000 programming software and creating a
controller, you are ready to create a new module. You can use a default
configuration or set up a custom, or specific, configuration for your
application program.
1. On the Controller Organizer, right-click I/O Configuration and choose
New Module.
The Select Module dialog box appears.
IMPORTANT
RSLogix 5000 software, version 15 and later, lets you add I/O
modules online. When using any previous version, you must be
offline when you create a new module.