I/o module in the controllogix system – Rockwell Automation 1756-XXXX ControlLogix Analog I/O Modules User Manual
Page 17
Publication 1756-UM009C-EN-P - December 2010
17
What Are ControlLogix Analog I/O Modules? Chapter 1
I/O Module in the
ControlLogix System
ControlLogix modules mount in a ControlLogix chassis and use a removable
terminal block (RTB) or a Bulletin 1492 interface module
(1)
cable to connect
to all field-side wiring.
Before you install and use your module, you should do the following:
• Install and ground a 1756 chassis and power supply
(2)
. To install these
products, refer to the publications listed in
on
• Order and receive an RTB or IFM and its components for your
application.
(1)
The ControlLogix system has been agency certified using only the ControlLogix RTBs (1756-TBCH, 1756-TBNH,
1756-TBSH and 1756-TBS6H). Any application that requires agency certification of the ControlLogix system
using other wiring termination methods may require application specific approval by the certifying agency. To
see what analog interface modules are used with each ControlLogix analog I/O module, see
(2)
In addition to standard ControlLogix power supplies, ControlLogix Redundant Power Supplies are also available
for your application. For more information on these supplies, see the ControlLogix Selection Guide,
publication
IMPORTANT
RTBs and IFMs are not included with your
module purchase.
Types of ControlLogix Analog I/O Modules
Cat. No.
Description
RTB Used
Page
16-point non-isolated analog current/voltage input module
36-pin
8-point non-isolated analog current/voltage input module
6-point sourcing current loop input module
20-pin
6-point isolated analog current/voltage input module
6-point isolated RTD input module
6-point isolated Thermocouple/mV input module
6-point isolated Enhanced Thermocouple/mV input module
4-point non-isolated analog current/voltage output module
8-point non-isolated analog current/voltage output module
6-point isolated analog current output module
6-point isolated analog voltage output module