beautypg.com

INFICON STC-2002 Thin Film Deposition Controller Operating Manual User Manual

Page 93

background image

p STC-2002

DEPOSITION CONTROLLER

y

SECTION 3.XX

e page 91 of 276 ^


Press BAK (back) to abandon FILM# value edit. Press ENT (enter) to accept entered film number value as
seen next. Note that the FILM# on the edited line has been displaced by the new value of "3".


Once again, the change screen reappears from which any of the three choices could be made. The next
screen depicts the result of pressing the THK (thick) key.


Pressing the "1" key and then the "2" key produces the following screen. Numbers can be entered
indefinitely until either the BAK or the ENT (enter) key is pressed.


Pressing the ENT (enter) key returns the change screen. Please note that the decimal point is fixed and that
leading zeroes are suppressed.

Process
Thickness
entry menu